Se vi piace il mio sito e volete fare una donazione:
If you like my website and you want to make a donation:
FMSUSB - Feedback
Emails:
Here you can find some of the emails that people are sending to me as a feedback on the FMSUSM interface. Emails are in their original language.
On the bottom there is also a summary of the transmitters successfully tested with FMSUSB... something like a transmitter compatibility list.
THANKS FOR UR ANWER AND I SOLVE MY PROBLEM THE
INTERFACE WORK´S GREAT WHIT MY FUTABA SKYSPORT AND MY FUTABA SUPER 7 PCM, VERY
GOOD PROYECT GOOD LOCK
Thanks a million for making this project public.
Its GREAT.
I wanted to update you on the transmitters we have tested it on
Sanwa RD6000
And Graupner MC-15 (does not have a training ouput som had to make a connector myself)
Thanks again.
Keep up the good work
Best regards
Ciaoz,
nn so se ti ricordi di me, sono quello a cui hai inviato una interfaccia FMSUSB (per un Dragonfly 39 clone del T-Rex) e ti dicevo che nn funzionava ...
ho risolto :D
il link che mi avevi mandato con lo schema di collegamento al telecomado era per la radio con 4 canali,
Ciao!
Ho realizzato con successo 3 interfacce
Funzionano correttamente con le seguenti radio
Hitec Focus6
Graupner MC16/20
Futaba FF9
Tutte e tre le radio hanno funzionato bene sia con RFG2 che con FMS
Su sistemi operativi windowsXP e windows2000
Ciao
P.S.
Ho appena aggiunto il tuo sito
Ciao
Hello Wally,
Firstly may I say "thank you" for sharing details of your excellent USB interface for RC controllers on the web.
I've built your FMSUSB device and after one problem (D+ and D- on the USB connector were swapped) have got everything working. The main differences of my version is I have built it on stripboard (veroboard), and am using a 220nF +/- 10% capacitor for C5.
I have successfully interfaced my Multiplex Cockpit MM via FMSUSB with FMS and am now practising flying helicopters.
.........
.........
.........
Hi,
I have tried your FMSUSB device with RealFlight G2, using your "RealflightG2.rcs" map. I found that with my Multiplex Cockpit MM channels 3 and 4 needed to be swapped. I have attached a copy of the updated rcs file for your information. I guess that my radio is different from other makes.
.........
.........
.........
.........
.........
.........
Io ho ricevuto il pic e il quarzo, gia' montato il circuito e testato, funziona divinamente.....
Io uso una Hitec Flash5 con WinXP, testato con FMS e Re-Volt. OK
.........
.........
.........
Abbiamo appena saldato il connetore Futaba e provato l´interfaccia.
Risponde a tutti i commandi. Alla callibrazione sotto Windows chiede di
callibrare anche le altre assi che non ci sono e sotto la finestra test
si muovono all´imapazzata. Ora dobbiamo solo provare con alcuni
simulatori. Un test veloce con FMS ha dato risultati posititvi. Ora
vediamo con Flight Gear e Microsoft Flight Simulator.
La tengo aggiornato.
Grazie per l´impegno dedicatoci.
Saluti a presto,
Hello Mr. Zanette,
I just tried the new firmfare you put on your site and I must say that the bug is gone. Following is the set of cases I tested:
1. Plugged the interface in my PC with RC Tx not connected to Interface, worked great. Automatic detection as FMSUSB. Tried with FMS and worked fine.
2. Unplugged the interface and plugged it back in PC with TX not connected, worked great.
3. Connected the TX with interface 1st and then plugged the interface in PC, auto detection this time too. Worked great.
4. Unplugged the interface from PC with TX still connected to TX, plugged it back into PC, worked great.
If you are using FMSUSB with a transmitter not reported here please write me and i will update the list immediately.
If you are in doubt for the compatibility with your transmitter write me about that.
